How to Buy a Regis Aluminum Fence | Material Estimate Guide

The steps below are a simple way to estimate the materials when buying a Regis Ornamental Aluminum Fence, but they will also work for any routed fence, including Bufftech Vinyl Fences.  If you have a non-standard layout, or if you would like a customer service representatives to look over your material list before you order, please email us

Note: Regis Aluminum Fences have a panel length of either 6’ (3000 Residential Series) or 8’ (4000 Commercial Series)

1. Draw your fence on a sheet of paper and label each run with its length.
2. For each run:
   • # of panels = [(length of run - length of gates) / panel length].  Note: if the is a remainder, add 1.
   • # of line posts = [# of panels - 1].  Also, subtract 1 for each gate "in line" (see illustration below)
   • If you plan to cut a panel into 2 or more smaller panels, add 1 line post per additional panel.
3. For all gates in your fence, add 2 gate posts.  The exception is: if the gate is the end point of your fence, add 1 gate post and 1 blank post.
4. For each corner:
   • If there is no gate, add a corner post.  If there is a gate, the gate post will serve as the corner post.
5. For each end point (where your fence stops):
   • If there is no gate, add an end post.  If there is a gate, then the blank post (from step 3) will serve as the end post.
6. For all posts, add a post cap.
7. For all gates, add 1 set of hinges and 1 latch
8. (Optional) Add any decorative elements available, such as: triad finials, scrolls, etc.

What is a...Routed Fence System?

A routed fence system is one that uses pre-cut holes in the posts to hold the panels in place, instead of brackets and screws.  The holes, which are precisely machine cut into the posts to match each specific fence model, are depedent on the post's function; which means that there are different posts for lines, corners, ends, and gates.  The panels usually either snap into place, or are secured using lock rings, depending on the type of fence.  Contrast this with a bracketed system, where all of the posts are blank and brackets are screwed into the posts to hold the fence panel in place.

Illustration 1: A series of routed line posts for a 3 rail fence system.  

 

Illustration 2: Routed fence posts with panels inserted.

 

Why should I choose a routed fence? 

Of course, the fence you choose will depend on your specific needs, but in general routed systems offer several benefits that bracketed systems can't, including: no visible screws or brackets, typically a lower cost per foot due to reduced hardware requirements, and ease of assembly.

Buy a Routed Fence System Online

Bufftech Vinyl Fences
Regis Ornamental Aluminum Fences

New Westbury Aluminum Railing Styles.

Quick product update....
We have added 3 styles of Westbury Aluminum Railing to our online fence & railing store:

The Tuscany is a classic looking 2 rail aluminum railing system that is versatile enough to fit just about any railing application.

Riviera R Style adds a little more modern flair with a third rail and decorative ornamental rings.

The Tuscany and the Riviera Railings go very well with similarly styled Regis 2 and 3 Rail Aluminum Fences.  Both feature the same high quality, AAMA Verified Architectural Grade Powder Coat and lifetime limited warranties.

The Montego is a unique looking 2 rail system with architectural balusters that give it its classic Mediterranean look